| Customization: | Available |
|---|---|
| After-sales Service: | 3 |
| Warranty: | 3 |
|
Still deciding? Get samples of US$ 11/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
ITEM
|
Factory direct stainless steel cable wire rope galvanized inner wire
|
||
|
MATERIAL
|
1.Galvanized steel wire rope.
2.coated PVC/PE /Teflon/Rubber/SLPE) High carbon steel with bigger braking load 3.Armed inner wire 4.gear inner wire |
||
|
Structure
|
1)joint :7x7,7x19
2)Rolling :1x19,1x12 3)Shift inner wire (1+14), injection molding inner wire , speedometer and so on |
||
|
Diameter
|
1.2mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm
|
||
|
Colour
|
Injection molding inner wire and hose can be divided into many colors. Mainly in gray.
|
||
|
Application
|
Motorcycle cable .auto cable, and other tractor, truck cables.We can also sell it into pieces with head and plastic outer.
|
||
|
Character
|
1. 1*19 structure is hard than 7*7, used for goes smooth,Use the frequency is not high cable.After PVC coating, Increased life expectancy. Increased efficiency, increased sliding resistance. Use for Brake cable, Throttle cable,Bonnet cable.
2.7*7 Structure is soft than 1*19,and Life expectancy is higher than 1 * 19.For bending more,After PVC coating, Increased life expectancy. Increased efficiency, increased sliding resistance. the use of high frequency cable,Accelerater cable,clutch cable. |
||
|
Standard
|
We can also sell it into pieces with head and plastic outer.
|
||
|
Packaging
|
Usually packing in1,000m/coil, 2,000m, 500m/roll, We also followed a definite package as per customer's requirement
|
||
|
Braking load (KGF)
|
1)1*12 1.2mm :155
2) 1*19 2.0mm:425 3)1*19 2.5mm:660
4)7*7 1.5mm:228
5)7*7 2.0mm:380 6)7*7 1.2mm:146 7)1*19 1.9mm:385 8)1*19 1.6mm:296 |
||
|
Tensile strength
|
1870Mpa
|
||
){kind=link}